Streamline Aluminum Struts
- All struts are made from 6061-T6 extruded aluminum
- Standard Lengths: 10 ft – 6 in long (126″)
- HD struts are extruded to 11 ft. (132″)
- Inside dimension accommodate
- 3/4″ – Bar stock (small strut)
- 1″ – Bar stock (large strut)
- Inside dimension accommodate
- Can be cut to 95″ (or any lesser length) for UPS/FedEx shipment* – if applicable to your use. (No Charge) This will avoid the high cost on shipping lengths over 95″ by Motor Freight.
- Billing will be for the full 126″/132″ extruded length.
- Shipping: F.O.B. East Palestine, Ohio
- In stock ready for immediate delivery
*95 inches is the maximum package length permitted by UPS/FedEx regulations.
NOTE: USA Dollars only. Please call for current USA and foreign trade pricing.
SMALL STRUTS
Stronger than but compared to 1.275 Dia x .065 wall 6061T6 tubing

- ULTIMATE = 18,012 PSI
- YIELD = 15,947 PSI
- SHEAR = 11,637 PSI
- AREA = .431 SQ IN
- CIRCUMFERENCE = 5.625
- WEIGHT = 0.517 #/FT
(14-A-SM 126) 126 ” LG – $90.00 / LENGTH
(14-AB-SM 95) 95″LG – $81.00 / LENGTH
LARGE STRUTS
Stronger than but compared to 2.25 Dia x .065 wall 6061T6 tubing

- ULTIMATE = 23,268 PSI
- YIELD = 20,498 PSI
- SHEER = 14,958 PSI
- AREA = .554 SQ IN
- CIRCUMFERENCE = 7.125
- WEIGHT = 0.604 #/FT
(13-A LG-126) 126″ LG – $98.00 / LENGTH
(13-AB-LG-95) 95″ LG – $91.00 / LENGTH
HEAVY DUTY STRUTS

Stronger than but compared to 2.75 Dia x .090 wall 6061T6 tubing
- ULTIMATE = 36,582 PSI
- YIELD = 32,227 PSI
- SHEAR = 23,317 PSI
- AREA = .871 SQ IN
- CIRCUMFERENCE = 8.625
- WEIGHT = 1.05 #/FT
(12-A-HD-132) 132 ” LG – $172.00 / LENGTH
(12AB-HD-95) 95″ LG – $141.00 / LENGTH
JURY STRUTS
Stronger than but compared to .75 Dia x .065 wall 6061T6 tubing

- ULTIMATE = 7,938 PSI
- YIELD = 6,993 PSI
- SHEER = 5,103 PSI
- AREA = .189 SQ IN
- CIRCUMFERENCE = 2.531
- WEIGHT = 0.227 #/FT
(15-A) 72″ LG – $46.00 / LENGTH
(15-B) Jury Strut Installation Kit – $60.00
New design one kit does both wings!
SAMPLES HD/ + $28.00 – Call for info
Long Aluminum Stock
NOTE: USA Dollars only. Please call for current USA and foreign trade pricing.

- 3/4″ Sq. tubing x .049 wall 6061-T6 – $14.00/ft.
- 3/4″ Sq. tubing x .063 wall 6061-T6 – $15.25/ft.
- 3/4″ x 1″ SOLID 6061T6 – $16.00/ft. (not shown)
- 1″ x 1″ SOLID 6061T6 – $18.00/ft. (not shown)

- Trailing Edge – 1.5″ x 8′-0″ x .020 – $48.00 section
- Trailing Edge – 1.5″ x 8′-0″ x .025 – $54.00 section


- Rib Cap Strip* – 6061-T6 Extruded “L” or “T”
- 132″ length L section – $38.00 strip
- 132″ length T section – $38.00 strip
- LEADING EDGE MILLING – $4.50 / each
*Note: cannot be shipped UPS unless milled at nose to your measurement – $3.00 Strip
Strut Fittings
STRUT FITTINGS – TO WING – 6061T6

1.00 SQ. x 6.00 – STRAIGHT – $73.50
.
.

0.75 x 1.00 x 5.5 – STRAIGHT – $69.50
.
.

1.00 x 6.00 – ANGLED ATTACH – $87.50
.
.
.

0.75 x 5.50 – ANGLED ATTACH – $81.00
.
.
STRUT FITTINGS – TO FUSELAGE- 061T6

1.00 SQ. x 6.00 – SLOTTED – $74.50
.
.
.

0.75 x 1.00 x 5.5 – SLOTTED – $70.00
.
.
SINGLE ATTACH – $125.00